Finished installing my AVIC-Z2 NAV unit this evening. It took a little longer than expected because the wire they sent for the reverse sensor had something that looked like one of those ferrite core things for wires and the wire was broken inside it. So I couldn't figure out why it wouldn't switch on the reverse camera and wasn't getting a reverse signal. Also found out that the NAV unit comes from the factory with the camera option turned off. But it's all done except for my bluetooth unit which should arrive tomorrow. I can plug that in before I leave town.
Here are a couple of pictures of it installed.
Also, I tested out mounting the GPS antenna where the center speaker is supposed to go. Thought it was worth a try. Turned out to be a GREAT location. Completely hidden under the dash speaker cover and still gets a good signal.
I'll do a quick write-up with a bunch of pics tomorrow.