This is as basic as possible. It cost me about .72 cents for 3 1/4-20X3" bolts. It's built from scrap mdf I had laying around the shop. Its ver easy to build and is way cheaper than buying a plastic one.
Here it is laying in the shop before install:
This is one of the 3 bolts that hold it in place. I used existing oles that were already in my seat support brackets.
Here it is installed in the truck:
A couple pictures of some junk already gathering there:
This is what you see when the seats down:
Hope this saves people some money on those expensive ones in the store.
