I have a 2011 tundra crewmax limited with the factory jbl 6 cd changer, sirusxm, hands free phone/ blue tooth. I purchased a used 2010 navi unit and installed it.
Navi unit toyota part # 86120-0c330 - denso part # dw468100-0596. The gps and am/fmradio work fine along with the steering wheel radio volume, scan and mode buttons.
My voicecommand button on steering wheel, blue tooth/phone and sirusxm no longer function along with over head microphone i assume. All come up greyed out or not even listed in settings menu on navi head.
I also have back-up cam. That displays in rearviewmirror - can i bring that feed into the navi unit display too?
I found the 2007 install guide in other post and see i need to get a couple of wireharnass and a mic connector to modify the wiring and connect up correctly to get the blue tooth / phone and voice command to work (when i press the voice buttton all i get is 2 short quick beeps).
My new york dealer could not identfy the parts listed in the instructions due to the fact there are no toyota part numbers listed for these items and they are for canadian tundra's.
Does any one know where i can purchase these items here or in canada or any other options (after market kits?)to get back all the features i had with the regular jbl unit?
Also does any one know if the navi head has built in sirusxm receiver or do i need to purchase external unit and add. I have the original sirusxm sat. Antenna wire but it will not connect to navi head. Can i still use factory xm ant. With an external unit if i need to get one?
I have pictures of the back of both units and of my dash wiring harness's that plug into the jbl stero, if that would be helpful for any one who could guide me through this.
Any help any one can give me in getting the install instructions and/or getting the correct connectors and wire harness adapters would be greatly appreciated - thank you !!